Frequently asked questions
What BiomassFlux covers, where its numbers come from and how they are worked out. The datasets themselves are in the data catalogue.
What is BiomassFlux?
BiomassFlux is a web calculator for biomass carbon abatement in Australia. Pick a point with a radius or draw a region on a map, and it reports the biomass residue there, what it costs to move it, what a plant makes of it and the fossil carbon it displaces. It joins every state's biomass residue assessment into one national supply table.
How does BiomassFlux work?
It runs four steps: Draw, Move, Convert and Account. The region you draw is intersected with the national feedstock table and tonnes are apportioned by area; the haul is then costed, every end use is run side by side, and the fossil CO₂ displaced is netted against the transport footprint. The steps are set out under How it works.
Where does the biomass data come from?
Residue supply comes from the state ABBA (Australian Biomass for Bioenergy Assessment) datasets for New South Wales, Queensland, South Australia, Western Australia, Tasmania and Victoria, published by the state agencies. Standing biomass is shown for reference from ESA CCI Biomass (100 m above-ground biomass), NASA GEDI L4B via TERN and DCCEEW FullCAM. The sources are mirrored with their provenance, and the datasets are listed in the data catalogue.
Which areas of Australia are covered?
As of October 2026, residue data is loaded for six states: New South Wales, Queensland, South Australia, Western Australia, Tasmania and Victoria. Victoria is partial: only 11 of 43 Sustainability Victoria files could be recovered, so cereal straw, municipal solid waste and construction and demolition timber are missing there and Victorian tonnes are under-counted. The Northern Territory and the ACT have no residue data loaded.
How much biomass residue is in the data?
As loaded in October 2026, about 94 million dry tonnes of residue a year across the six states. By state: New South Wales 32.1 Mt, South Australia 23.5 Mt, Western Australia 19.6 Mt, Queensland 16.4 Mt, Tasmania 2.0 Mt and Victoria 0.6 Mt. Crop residues are the largest share at about 59 Mt. Per-state and per-feedstock totals are in the data catalogue.
Which feedstocks are included?
BiomassFlux defines 28 feedstock types across crop residues, forestry, horticulture, livestock, organic waste, energy crops and pellets, for example wheat straw, sugarcane bagasse, sawmill residue, macadamia shells, feedlot cattle manure and municipal solid waste organics. Each of these has a default moisture and energy content, such as 12 % moisture and 17 MJ/kg dry for wheat straw. The loaded supply also carries residue types from the state datasets that are not among the 28, such as banana residue, biosolids and grape marc. The 28 types with their defaults are in the data catalogue.
How are transport cost and emissions calculated?
Diesel use is wet tonnes × (litres per 100 km ÷ payload ÷ 100) × kilometres, with the empty return leg counted. The defaults are 40 L/100 km, a 25 t payload and diesel at $2.40/L, and CO₂e is 87.61 kg per GJ of diesel (NGA Factors 2023). The haul is a driving route to a plant you place on the map (the straight line × 1.3 if no route is returned), or otherwise the tonnage-weighted mean distance to the region centre × 1.3. Fuel use, payload, diesel price and the return leg can be changed under Adjust, and the haul distance can be overridden.
What can the biomass be used for?
BiomassFlux compares six end uses side by side: a biomass power plant sized from your supply, co-firing in a 500 MW coal plant, hybrid solar-biomass at 5 to 50 MWe, industrial heat from a 5 MWth boiler, biochar by slow pyrolysis, and renewable diesel or methanol. The feedstock can also be pre-processed into white or black pellets, which lose 22 % or 30 % of their mass.
How is carbon abatement estimated?
Net abatement is the fossil emissions the selected end use displaces, plus the carbon stored in biochar, minus the diesel burnt hauling the feedstock. Displaced emissions use 0.68 t CO₂e per MWh of grid electricity, 51.5 kg per GJ of gas, 2.7 t per kL of diesel and 2.42 t CO₂ per tonne of coal. It is an indicative account: what would otherwise happen to the residue (burning or decay) is not counted yet.
How reliable are the results?
Results carry the uncertainty of the original data: where an ABBA dataset gives a minimum and maximum, BiomassFlux keeps them and shows the range next to the average. Supply is area-apportioned, so a region that cuts through a source polygon gets that polygon's tonnes in proportion to the area inside it. Standing biomass from ESA CCI, GEDI and FullCAM is reference only and is not counted as residue.
Is BiomassFlux based on NSW BioSMART?
Yes. The engine is a port of NSW BioSMART's bmfb supply-chain model (CSIRO / NSW DPI), laid out like the original so its maths can be checked against it. BiomassFlux extends it to every state's ABBA data, keeps the min–max range BioSMART drops, counts the empty return leg of each haul and reports the carbon abatement BioSMART does not.
Do I need an account to use BiomassFlux?
The map workspace needs a sign-in, with no password: your email signs you in. Your saved scenarios are kept under that email and stay private: the first time you open, save or email one, we email you a six-digit code and you type it in once. The home page, the data catalogue and this FAQ are open without signing in.
How do I export or share a report?
Assess a region in the workspace and open the Impact tab. From there you can save the scenario, export a PDF or JSON, copy a share link, or email the report to up to 10 recipients. Recipients get the PDF and a link that opens the same scenario on the map.
Does BiomassFlux include biomass prices or a cost per tonne of CO₂e?
Not yet. Feedstock prices and counterfactual emissions are the next step, after which every scenario will end in dollars per tonne of CO₂e. Today the only cost reported is the diesel cost of transport, at a default $2.40 per litre.